Tuesday, June 26, 2012

DIY plywood flooring

So I don't know how many people out there LOVE carpet and I mean no offense but I HATE the darn stuff.  I am not usually one to say hate but I really do HATE carpet with a passion.  I won't go into details about all my many reasons but I think I say enough when I say I have a dog.  

So we have lived in our house for coming up on 4 years and we have the original carpet that was installed I'm sure a few years before we bought it so I guess that's saying enough there too.  I am a hard woods girl I love the cleanliness and overall easy cleaning of hard woods.  Ever since we bought our little bungalow I have been begging to replace the carpet with wood flooring.  We kept looking for the cheapest option and every time there was a sale we would break out the dimensions and find that to do our house in just materials it was about $3500-$4000 not including the labor.  As we are always on a budget around our house like most young americans these days we kept putting it off.  

While at lunch with my mom at a trendy local restaurant we looked down at the flooring and noticed how beautiful and rustic it looked.  But something was a little off...  Was that PLYWOOD!!!!  Yes it was!  OMG what a great idea!  And how practical...and CHEAP... yes this seemed perfect for our house and even more perfect for our budget!  I was so excited to tell my husband all about what we found out...  Well he didn't have quite the same reaction to me... it was more like are you nuts? PLYWOOD?  You've got to be joking... So of course I had to take him to lunch so he could see it for himself.  Needless to say he was more impressed by the way it looked than he thought he would be.  So 8 months later we decided to start on the project.  So here are a some pictures of before... 

LIVING ROOM

ENRTYWAY


MATERIALS
We purchased the cabinet grade plywood at Home Depot as it was the cheapest I could find.  We also had them cut the full sheets of plywood into 2 foot by 4 foot pieces as cutting them at home with a skill saw seemed a little risky (wobbly cut lines).  They cut the first 5 cuts free and then it was $0.50 a cut after that.  We thought it was well worth it.  Something to consider if you decide to pursue this project is that a 4 foot by 8 foot sheet of plywood is not EXACTLY 4 foot by 8 foot.  They are all off a little bit here and there so you will have to compensate for this when you start laying your flooring.  

We also decided to break up the full sheets of plywood into 2x4 sheets but I have seen a few blogs where they did 1x4 and 1x8.  I think for the overall structure and shape of our house we picked the correct size to have the boards cut.  But the sky is the limit for creativity on this project.


THE LABOR
Don't ask me why but I was actually smiling under the mask. LOL!  


PREP
So our bungalow was built in the 70's and the second thing I HATED most about this house was the popcorn ceiling.  What were contractors thinking when they put this nasty stuff up?  All I can say is that at least whoever put ours up didn't put the glitter in the mix too.


POPCORN REMOVAL
So this was the nastiest part of the project but it had to be done.  Step 1 was we attached a garden mister  nozzle to the garden hose and dragged it through the house through a window and wetted down the ceiling.  After about 5 minutes the popcorn plaster becomes soft and you can remove it with a metal scraper.











The removal goes pretty fast.  After removing the plaster you allow the sheetrock to dry. So you can apply the new baroque.


Meanwhile my son wanted to help so bad and as we still do not know how toxic the ceiling stuff is we wouldn't let him in that section of the house.  So he kept asking... and asking... and asking... so I jokingly said OK Ethan you can work in the kitchen on the tile.  He was so excited!  So he grabbed his safety goggle AKA: Motor cycle riding goggles, a hammer and some attitude and he got to work.  

Little did I know how well he was going to do!



Before I knew it he had most of it torn out.  This one was super funny!  Whoever laid this tile obviously didn't do it correctly if my 9 year old can rip out 50 tiles single handedly.  Not that he or I was complaining lol.


So he got a little thirsty after that and took a break.  At this point we were all done in the rest of the house with the plaster and removal of the old carpet



For the ceiling we decided to use the pre-mixed plaster called Bedex.  This is about the 4th time that I have laid down plaster on ceilings and walls so I am pretty practiced at it but all in all it took me about 8 hours to do 725 square feet of ceiling.  I did a heavy tuscan style baroque because I love the way the heavy texture looks.


As everything was up off the floors and out of the way I also deiced that I wanted to change up my paint pallets in my house so I went with a light dove grey in the dining room and a smoky blue in the rest of the house


LAYING THE PLANKS
So after we thoroughly swept and vacuumed all the floors we started laying the first line of planks.  This is the MOST IMPORTANT line of the flooring in the whole project.  You need to make sure that all the boards are evenly lined up as it can throw the whole project off if it is not.  After laying them all out and piecing the odd lengths in we decided to screw them all down.  We used a counter sink drill bit followed by steel 2 1/4" screws.  We started off with 8 screws per plank but it quickly became obvious that to get the planks level with adjoining boards we would need to use 12 screws in each plank.

PUTTY
So after all the planks were laid down and screwed into place I went through and puttied all the seams and filled in all the holes left by the screws.

Here is a picture of when I thought that I just needed to fill the holes... Joke was on me for that one.

When I finally got to the kitchen Ethan decided that it looked pretty fun and that he wanted to try...  Well since he did such a fantastic job on the tiles in the kitchen I thought what the heck!  Gives me a break right?
Ya he lasted 5 minutes and said "this is boring" and took off.  I don't blame him after 5 hours doning the same thing I was about to ditch my husband too!

So I started on the seams and made my way back through the house to the living room.

SANDING
After applying the putty to all the seams and holes we started sanding... However... we had several problems that arose.  First was that I was used to working with a disk or round floor sander so that is exactly what I rented.  WRONG do not rent one of those for this project.  For some reason the way that the plywood is formed it is too flat or something I never really figured it out but every time I tried to put the sander down to sand the paper would tear off the pad.  It didn't matter what grit that I tried.  So I returned it and got a square pad sander that does more of a gyrating motion instead of a spinning motion and this was key!  We ended up using 80 grit paper first and went back over with the 100 grit.  

CAUTION:
Do not sand in the same spot for very longs as the 1/16" of veneer on top of the plywood will come off leaving the ugly chipboard underneath.  

STAINING
After sanding down all the putty it was time for the staining process.  Due to the fact that I wanted to stay in my home while this project was going and I have a child and pet and I didn't want to be breathing in harmful chemicals I went with the water based low VOC stain that is environmentally friendly.

On the can it says to apply with this stain pad on a pole so that is what we did but I was impatient and wanted to help so I grabbed a rag and started rubbing in the stain with the rag in the hallway.  Honestly the rag method took MUCH longer but it looks so much better.  With the application pad you could see the streaks in the the stain where you started and stopped and it was a lot harder to blend the wet with the dry areas

Finished with the stain and this is after the varnish.  Again I went with a low VOC water based polyurethane.  I did 3 coats total but my husband thinks that we should probably have one more coat.  This is all up to you but you really should have at least 2 coats.

I don't know if you can see in the middle of this picture the mess up I did.  This was caused by trying to blend the wet stain and the dry stain.  Whatever you do DO NOT double coat the stain.  Meaning when you are applying the wet stain and coming up on a dry area do not put the stain on the dry area.  Instead get as close as you can and take a wet rag and blend it.  This will save you a lot of headache and sanding.

TRIM
As we tore out all of the carpet we didn't save the trim either.  It was pretty banged up and outdated as well and I was happy to see it go to be honest.  For the new trim I really wanted the chunky 6" trim but it was a little pricey for the budget we were on so I went with the 4" paint grade trim as I was going to paint it anyway and it's about 1/2 the price of regular oak trim.

All in all my husband and I worked on this project a total of 90+ hours and with all the supplies:

Paint for walls and ceilings
Flooring
Trim
Tools
Prep materials
Stain and Varnish putty
Rentals

All expenses were $1585

We did save $100 at Home Depot for having a coupon which was nice 
so our grand total would have been $1685 

Other expenses to think about:
Lunch and Dinner out everyday for a week
Hotel if necessary
Hydrating drinks
Helpers wages
Tool rentals if you do not own them (we own all the tools necessary for this project)

All in all this turned out to be a really simple project but just had lots of easy steps to follow.  I would not attempt this if you do not know how to handle a skill saw, Square, or chop saw.

We LOVE our new flooring and are SOOOOOO happy we did this project.

Thanks for looking and feel free to email me with any questions you may have.

Sarah






















28 comments :

  1. I was really fascinated of your idea, the way transform such simple plywood into an elegant look. Someday, somehow I also want to try that kind of flooring. As of the moment our house is in the type of floating floors. Anyway, I had a great time reading your post and I say thank you for sharing.

    ReplyDelete
  2. Wow, all the detail you gave of the process is amazingly helpful. I have to say, I was a little disappointed to only see one tiny corner of the finished floor in your last picture? Please post more! Thanks for all the info :-)

    ReplyDelete
  3. What PLY of sheets did you use for the flooring? I would have liked the false ceiling from wood as well but you did a great job :)

    Regards

    slhayat

    ReplyDelete
  4. Perfect, by reading the above mentioned information it seems like a piece of cake to me but i am sure this procedure requires some basic knowledge and skills to install plywood flooring on your own.

    ReplyDelete
  5. I love this idea. We have ugly carpeting that is dingy and we want to get rid of it. We need an inexpensive way to rip them up and put down something new. Love this!

    ReplyDelete
  6. How many square feet did you guys cover?

    ReplyDelete
  7. Thanks for the excellent detailed tutorial. I didn't realize it was so easy to rid oneself of nasty popcorn ceiling. Might be a dumb question, but I'll ask anyway. Why did you putty the seams between the planks? Aesthetic, or Functional?

    ReplyDelete
  8. Hi,
    MDF Board suitable for use in dry environments.

    ReplyDelete
  9. Hey Sarah thanks heaps for your ideas brilliant! But do you have a pic of the final product :))))) would love to see it :)))

    ReplyDelete
  10. Did you put the plywood on your concrete slab?

    ReplyDelete
  11. Did you have to paint the backs of your boards to keep them from warping with the stain?

    ReplyDelete
  12. Wow, reading all that went into it, I was expecting a much higher cost! It looks great, too!

    ReplyDelete
  13. Thanks for providing the nice idea of making plywood flooring.and i also want to thank you for providing the detail step by step.
    Wholesaler in Malaysia

    ReplyDelete
  14. I think these look great! :) What happens if you decide down the line that you want to change them tho?

    ReplyDelete
  15. Would you mind sharing links or brands to specific stains and sealers you used. I also want to live in the house while we do our floors so the low VOC would be great!

    ReplyDelete
  16. Floors and Up is a flooring company that has been trusted by home and business owners in Houston for over half a century. Flooring in Houston

    ReplyDelete
  17. I'd love to know the color stain you used. I've searched the blog forwards and backwards and can't figure it out. Do you remember? Thanks in advance! I love what you did to the floors and I appreciate the tip to use a rag!

    ReplyDelete
  18. Very informal post and well explained, Thanks for sharing such good resource. this explains all the points which I was looking for. also consider reading: Plywood Machinery

    ReplyDelete
  19. Now that it's been a few years, how do you find the flooring holding up? I know that plywood has a reputation for acquiring many dents and chips in the floor - how have your turned out?

    ReplyDelete
  20. Laminate flooring can be installed relatively easily, but there are some points when your average person just puts forth and average job. When you want a professional laminate flooring installation getting a flooring installer who does it day in and day out really makes any laminate flooring project look greta. If you want more info click here link : laminate flooring

    ReplyDelete
  21. Hey! Quick question that's completely Slims supplement off topic. Do you know how to make your site mobile friendly? My site looks weird when viewing from my apple iphone. I'm trying to find a template or plugin that might be able to resolve this issue. If you have any suggestions, please share. With thanks! The Gaming Club bears a license from the handing out of Gibraltar, and claims to be one of a prefer few casinos that have a license from the Gibraltar government. A aficionado of the Interactive Gaming Council (IGC), The Gaming Club follows every the guidelines laid next to by the organization, something that has bearing in mind a long mannerism in it swine credited as a great place to gamble online.

    Everything nearly The Gaming Club feels good; be it the promotions, the huge number of games, the merged banking options upon offer, the futuristic security measures, or the fair and liable gaming practices the casino adopts.

    The Gaming Club motors along upon software developed by one of the giants of online gaming software enhancement Microgaming. The software it uses is unprejudiced and has a range of features designed to put in your online gambling experience and create you desire to arrive incite after all round of gambling you complete here.

    Another hallmark of a fine casino is the character of its customer retain team, and The Gaming Club does not disappoint upon this front.
    https://slimssupplement.com

    ReplyDelete
  22. I noticed that your floors were concrete, correct, and you didn't use an underlayment? Is it not necessary. I am getting ready to dob this kind muy own house. My downstairs is concrete and my upstairs has plywood subfloors.Thank you for the great tutorial.Any advice?

    ReplyDelete
  23. Did this change the height of the floor? Was it even with other rooms? If not, how did you handle the transition?

    ReplyDelete
  24. Great job on the DIY plywood flooring! It’s inspiring to see how creative solutions can transform a home on a budget. I've heard fantastic things about Sharonply Plywood for projects like this.
    Best Plywood In India

    ReplyDelete

Thank you for commenting! I love to hear from you!